Categories
PP Melt Blown Filter Cartridge
 |
|
Interface / End Caps
|
|
|
Introduction
|
| The filtration media of PP melt blown filter cartridge is PP of nonpoisonous and tasteless as the material. It is made by melt-sprayed, extruded, stretched and formed into tubeLike core. The benefit summary: the features of small resistance, large flow rate, strong dirt holing capacity, corrosion resistance, good pressure resistance and wide chemical compatibility. |
|
Specifications and technical parameters
|
|
Filter medium: PP Relative filtration pore size: 1、3、5、10、20、30、50、75、100 (μm) Filter cage: PP Length: 5"、10"、 20"、 30"、 40" Effective filtration area: ≥0.045 m2/10" Outer diameter(OD): 60.0 mm～65.0 mm Inner diameter(ID): 28.0 mm～30.0 mm Max. operating temperature: 60℃，0.2 MPa Max. positive pressure: 0.2 MPa（25℃） Max. back pressure: 0.1 MPa（25℃） Others: special requirement of diameter and end caps can be customized |
|
Typical Applications
|
| Mainly it is suitable for filter bigger pellets, water pre-treatment |
| Pure water flow rate reference table: the initial value of 10＂cartridge L/min （△P=0.015 MPa, 1cP, 25℃） |
 |