PP Micropore Filter Cartridge

PP Micropore Filter Cartridge

Introduction

The filtration media of PP micropore filter cartridge is superfine PP fibre membrane. It is a fixed and depth filter cartridge with a wide range of pore size from 0.1μm to 60μm. The materials comply with FDA related requirements. It is the first choice of pre-filtration due to its unique low differential pressure, high flow rate and long service life feature. The structure of PP has stable performance and wide chemical compatibility.

Specifications and technical parameters

Filter medium: PP fibre membrane
Support layer: PP
Filter cage: PP
Pore size: 0.1、0.2、0.45、0.65、1、3、5、10、20、30、60 (μm)
Length: 5"、10"、20"、30"、40"
Gasket/O-rings: Silicone, NBR, EPDM, Viton
Sealing technique: thermal bonding
Effective filtration area: 0.65-1㎡/10"
Diameter: 69.0 mm
Max. operating temperature: 80℃，0.28 MPa
Max. forwarder differential pressure: 0.42 MPa（25℃）
Max. reverse diffetential pressure: 0.28 MPa（25℃）
Sterilizing temperature: 121℃ 30 min
Others: special requirement of diameter and end caps can be customized

Typical Applications

Medical industry: filtration for medical liquid, cell debris, biologicals
Chemical industry: filtration for organic solvent, chemical reagent, electroplate liquid, ink.
Food industry: drinking water, mineral water, beverage, beer, wine
Electronic industry: pre-filtration on water system both for counter infiltration, deionized water
Gas filtration: compressed air, nitrogen, carbon dioxide
Others: photoresist, magnetic media
Pure water flow rate reference table: the initial value of 10"cartridge L/min
（△P=0.01MPa, 1cP, 25℃）